HERO Software Introductory Workshop

HERO Software Introductory Workshop
9 CPD NatHERS Technical

HERO Software Introductory Workshop

23/06/2021 10:00 AM - 15:00 PM AEST 

 

Event Overview 

This intensive workshop is tailored for those using or considering using HERO software. This interactive session provides technical guidance and capability in proficient use of this software and participation is equal to 9 NatHERS technical CPD points

REQUIREMENTS FOR REGISTRATION:

  • Must have completed HERO Training
  • Must have access to a laptop with the latest version of HERO installed and bring to the workshop.
  • Must complete pre-work exercise prior to the workshop. Failure to do so by the designated date may forfeit your position in the workshop without refund.

REQUIRED PREPARATION:

Step 1: Assessment

  • Three weeks prior to the workshop, registrants will be provided with a set of documentation to complete an assessment in a specified version of the software.
  • The assessment should not take more than 4-5 hours to complete.

Step 2: Submit file

  • The completed assessment must be submitted (including a preview NatHERS certificate and .HERO software file) three working days prior to the workshop.
  • Failure to lodge the assessment by the deadline means you forfeit your position in the workshop with no refund.
  • The facilitator will analyse each assessment and tailor the workshop to best address issues identified in the exercise.

Step 3: Workshop

  • Bring a laptop with the latest version of HERO installed.
  • Bring the completed assessment to check and/or make changes during the workshop.
  • The assessment exercise will be reviewed in a slide presentation by the facilitator examining all relevant features at this level.

About the Presenter

 

Nick Bishop

As an ESD Engineer and Energy-Rater with over 10 years experience, Nick Bishop founded Hero Software to help deliver better tools for energy-raters; to allow the industry to deliver the quality of work that we all want to produce and to help drive the Australian construction industry towards a low-carbon future.

Matthew Graham

Matthew Graham is Principal of Graham Energy and an experienced subject matter expert in the Nationwide House Energy Rating Scheme. Matthew is a long-term accredited TPA, Trainer, TAC member and recognised Mentor in AccuRate, BERS Pro, FirstRate5 and HERO.

CPD Points: 9 NatHERS Technical CPD point. This will be recorded in Design Matters Members' CPD Manager within 5 business days following the event.

Cancellation Policy: We know that situations sometimes arise preventing you from attending. However, Design Matters does incur costs in organising these events. If you find you cannot attend, cancellation fees may apply.

Privacy Policy: Design Matters respects your privacy. Registrant data captured at this site in not disseminated to any third party, but is used solely by the Design Matters to confirm your registration.

Disclaimer